How To Drain An Above Ground Pool

Home » Pool Care » How To Drain An Above Ground Pool

How to drain an above ground pool – With the right approach, draining an above ground pool can be a simple and efficient task. This guide will provide you with a step-by-step process, safety precautions, and troubleshooting tips to ensure a successful draining experience.

Before diving into the details, let’s gather the necessary materials and understand the importance of safety measures.

Safety Precautions

How to drain an above ground pool

Draining an above ground pool involves handling heavy equipment and potentially hazardous chemicals. It’s crucial to prioritize safety throughout the process.

Always wear protective gear, including gloves and safety glasses, to prevent injuries from sharp edges or chemical splashes. Ensure constant supervision and keep children away from the pool area during draining.

Electrical Hazards, How to drain an above ground pool

Be aware of electrical hazards associated with pool pumps and other equipment. Never handle electrical components with wet hands or when standing in water. Disconnect all electrical connections before starting the draining process.

Materials Required

Draining an above-ground pool requires specific tools and equipment to ensure the process is efficient and safe. Here’s a comprehensive list of essential items you’ll need:

Submersible Pump:A submersible pump is the primary tool for removing water from the pool. Choose a pump with sufficient power to handle the volume of water in your pool. Electric submersible pumps are commonly used for above-ground pools, as they are easy to operate and can be submerged directly into the water.

Hose:A durable hose is essential for connecting the submersible pump to a drain or discharge point. Select a hose with a diameter that can accommodate the flow rate of the pump. Consider the length of the hose required to reach the desired drainage location.

Bucket:A bucket is useful for collecting any excess water or debris that may accumulate during the draining process. It can also be used to manually remove water from hard-to-reach areas of the pool.

Step-by-Step Draining Process

How to drain an above ground pool

Draining an above ground pool is a relatively straightforward process, but it does require some planning and preparation. By following these steps, you can ensure that the draining process goes smoothly and efficiently.

Before you begin, it’s important to gather all of the necessary materials and to take some safety precautions. Once you have everything you need, you can follow these steps to drain your pool:

Attach the pump

The first step is to attach the pump to the pool. The pump will be responsible for removing the water from the pool, so it’s important to make sure that it is properly attached. Most pumps will come with a set of instructions on how to attach them to the pool.

Follow these instructions carefully to ensure that the pump is properly attached.

Position the hose

Once the pump is attached, you need to position the hose. The hose will be responsible for carrying the water away from the pool. Make sure that the hose is long enough to reach the desired location and that it is not kinked or obstructed in any way.

Monitor the water level

Once the pump is running, you need to monitor the water level in the pool. The water level will gradually decrease as the pump removes the water. It’s important to keep an eye on the water level to make sure that the pump does not run dry.

If the pump runs dry, it can damage the pump.

Adjust the pump settings

Most pumps will have a variety of settings that you can adjust. These settings can be used to control the flow rate of the pump and the pressure of the water. It’s important to adjust the settings to the optimal level for your pool.

If the settings are not correct, the pump may not be able to remove the water from the pool efficiently.

Chemical Considerations: How To Drain An Above Ground Pool

Draining an above-ground pool requires careful attention to chemical balance to prevent damage to the pool liner and surrounding areas. Improperly balanced water can lead to staining, corrosion, and algae growth.

Before draining, test the water chemistry using a pool test kit. Adjust the pH level to between 7.2 and 7.8, alkalinity to between 80 and 120 ppm, and chlorine level to between 1 and 3 ppm.

Disposing of Pool Chemicals

Pool chemicals should be disposed of safely according to local regulations. Never pour them down the drain or into natural water bodies. Contact your local waste management authority for proper disposal methods.

Cleaning and Maintenance

Once the pool is drained, it’s crucial to clean it thoroughly to prevent algae growth, bacteria buildup, and other issues that can compromise the pool’s integrity and water quality. This maintenance step ensures the pool is ready for storage or refilling without harboring any contaminants.

To clean the pool, follow these steps:

Scrubbing the Pool Walls and Floor

  • Using a stiff brush or sponge, scrub the pool walls and floor to remove any dirt, debris, or algae. Pay particular attention to areas where algae tend to accumulate, such as corners and crevices.
  • For stubborn stains, you can use a mild detergent or pool cleaner specifically designed for above-ground pools. Follow the manufacturer’s instructions carefully to avoid damaging the pool liner.

Using Algaecides and Cleaning Agents

After scrubbing, apply an algaecide to the pool to prevent algae growth. Algaecides are available in various forms, such as liquid, granular, or tablet. Choose an algaecide that is compatible with your pool’s filtration system.

You can also use other cleaning agents, such as pool clarifiers or sanitizers, to remove impurities and maintain water clarity. Always follow the manufacturer’s instructions for proper usage and dosage.

Troubleshooting Common Issues

During the draining process, certain common issues may arise. Identifying and resolving these problems promptly ensures a smooth and efficient drainage.

Clogged Pumps

Clogged pumps can significantly slow down or even halt the draining process. Check for any debris or objects that may have gotten into the pump and obstruct its operation. Remove any blockages and ensure the pump is clear of obstructions.


Leaks can occur at various points in the drainage system, such as hose connections or the pool liner. Inspect the entire system thoroughly for any leaks. Tighten loose connections and repair any tears or holes in the liner.

Slow Draining

Slow draining can be caused by several factors, including a clogged filter, low water pressure, or a kinked hose. Clean the filter to remove any accumulated dirt or debris. Check the water pressure and ensure it is sufficient for the draining process.

Inspect the hose for any kinks or bends that may restrict water flow and straighten them out.